agilent U8000 series single output dc power supplies data sheet
2 key features excellent load and line regulation: (cv: <0.01% +2 mv; cc: <0.02% + 2ma) low output noise: 1 mvrms (20 hz to 20 mhz) over voltage and over current protection lcd display with backlight capability standby output for safety purposes save-and-recall function up to three memory states security features: keypad lock and physical lock mechanism more protection, more convenience for less its often dif? cult to ? nd a power supply that is just right for your test requirements and your budget. whether youre manufacturing consumer products, testing electronic components, or simply looking for reliable, affordable power, agilents family of basic power supplies now includes single output, non-programmable models in the 90 w to 150 w power range. with capabilities typically found only in programmable supplies, you get excellent value along with great ef? ciency in your work. as a result, you can minimize setup time and measurement errors and maximize device reliability. youll get the right power with a difference backed by stringent safety certi? cations and agilent quality standards at an affordable price. the agilent U8000 series offers 90 w to 150 w single output, non-programmable dc power supplies that include features typically found only in costly programmable supplies. the U8000 series delivers excellent value by providing reliable dc power, ef? cient setup capabilities, and important security features that let you address a variety of applications in electronics manufacturing and educational settings. power thats suitable for your application requirements the U8000 series with power ranging from 90 w to 150 w provides performance that is suitable for electronics manufacturing for computers and peripherals, communication systems and peripherals, aircraft/avionics systems, electronic components, and more. the U8000 series complements the agilent e3600 dc power supplies family to provide a wider range of power source alternatives. figure 1. the u8001a 90 w and u8002a 150 w single output dc power supplies
3 work ef? ciently with great features and solid performance within budget differentiated features typically found only in programmable power supplies the U8000 series offers fully integrated over voltage protection (ovp) and over current protection (ocp) to prevent damage to the device-under-test (dut). using the capability to save and recall three memory states, you can minimize errors and reduce set-up time. the U8000 series also provides security features such as keypad lock to prevent measurement errors due to accidental front panel usage. when the keypad lock is activated, the knob and all the buttons on the front panel are disabled except the keypad lock button. the physical lock mechanism found at the rear panel of the power supply provides secure instrument storage. the lcd display with backlight on/off options enables brighter display for data viewing (see figure 2). solid, reliable performance in its class the U8000 series provides excellent load and line regulation (constant voltage, cv: < 0.01% +2 mv; constant current, cc: < 0.02% +2 ma) to ensure stable output even when the load changes. with the fast 50 sec transient response, test times and manufacturing cost are signi? cantly reduced. the U8000 series comes with low output noise of 1 mvrms, 3 marms from 20 hz to 20 mhz, providing clean output and minimizing the interference in the dut. figure 2. backlight on/off options for lcd display backlight on backlight off get that something extra: safety and security the U8000 series has been stringently tested according to various industrial safety standards: csa (for us and ca regulatory requirements), c-tick (australia), and ce (europe). the U8000 series is fully integrated with ovp and ocp in order to prevent damage to the dut. the security features offered in the U8000 series prevent measurement errors and also ensure safety storage of the power supply. security features such as keypad locking capability preclude accidental front panel usage while the physical lock mechanism provides secure instrument storage. front panel operation an easy-to-use rotary knob and self-guiding keypads allow you to set the output at your desired resolution without any effort. also, both voltage and current levels can be set to a maximum resolution of 10 mv/10 ma from the front panel. in addition, you can save and recall for up to three operating states that are stored in the internal non-volatile memory. easy-to-use control functions: enabling or disabling ovp and ? ocp setting the ovp and ocp trip ? levels clearing ovp and ocp conditions ? setting and displaying the voltage ? and current limit values operating state storage/recall ? resetting the power supply to ? power-on state calibrating the power supply ? enabling or disabling the output ? compliant to several safety standardscsa, c-tick, ce physical lock mechanism figure 3. safety and security features of the U8000 series single output dc power supplies
4 backlight on/off options enabling brighter data display highly visible lcd displaying actual values of output voltage and current in meter mode and limit values of voltage and current in limit mode three storage locations (m1, m2, and m3) for user-de? ned operating states with save-and-recall capability fully integrated over voltage and over current protection to prevent damages to the dut keypad lock/unlock options to prevent accidental front panel usage selects the knob control function for voltage and current adjustment control for enabling and disabling the output of the power supply setting and display of the voltage and current limit values versatile binding posts offer ? exibility to use safety test leads, banana plugs or stripped wires rotary knob for quick and analog-like control of voltage and current features of the U8000 series
5 performance speci? cations electrical speci? cations parameter u8001a u8002a output ratings (at 0 c to 40 c) 0 to +30 v 0 to 3 a 0 to +30 v 0 to 5 a line and load regulation cv: <0.01% +2 mv cc: <0.02% +2 ma ripple and noise (25 c 5 c) cv: 12 mvp-p, <1 mvrms; cc: 3 marms load transient response time (within 15 mv from full load to half load and from half load to full load) <50 s programming accuracy 1 (25 c 5 c) <0.35% +20 mv <0.35% +20 ma readback accuracy 1 (25 c 5 c) <0.35% +20 mv <0.35% +20 ma meter resolution voltage: 10 mv current: 10 ma maximum output float voltage 240 vdc 1 speci? cations are based on one hour warm-up period.
6 supplemental characteristics supplemental characteristics parameter u8001a u8002a temperature coef? cient (for 12 months) cv: <100 ppm/ c cc: <380 ppm/ c cc: <300 ppm/ c output voltage overshoot (during turn-on or turn-off of ac power state with the output control set to less than 1 v) <1 v voltage programming speed, to within 1% of total excursion up full load no load 150 ms 100 ms down full load no load 30 ms 450 ms last memory setting enabled yes over voltage protection response time <1.5 ms when the trip voltage is equal to or greater than 3 v and <10 ms when the trip voltage is less than 3 v (average time for output to drop from 90% of output voltage to 1 v after ovp condition occurred) protection features parameter u8001a u8002a over voltage protection accuracy (% of output + offset) <0.5% +0.5 v over voltage protection programmable range 1 v to 33 v over current protection accuracy (% of output + offset) <0.5% +0.5 a over current protection programmable range 1 a to 3.3 a 1 a to 5.5 a ac power input speci? cations parameter u8001a u8002a input power option (selectable) 100 vac 10%, 47 to 63 hz 115 vac 10%, 47 to 63 hz 230 vac 10%, 47 to 63 hz fuse external, customer assessable physical speci? cations parameter u8001a u8002a dimensions (h x w x l) 88.1 mm x 212.3 mm x 394.3 mm weight 7.3 kg 8.3 kg
7 display liquid crystal display (lcd) operating environment ? operating temperature from 0 c to 40 c (for full rated output) and 40 c to 55 c (for derated output) ? relative humidity up to 95% ? altitude up to 2000 meters storage compliance -20 c to 70 c safety and emc compliance certi? ed with: ? iec 61326:2002/en61326:1997+ a1:1998+a3:2003 ? cispr 11:1990/en55011:1990 ? canada: ices-001:2004 ? australia/new zealand: as/nzs cispr11:2004 ? iec 61010-1:2001/en61010-1:2001 (2 nd edition) ? canada: can/csa-c22.2 no. 61010-1-04 ? usa: ansi/ul 61010-1:2004 memory operations up to three operating states programming language ? standard commands for ? programmable instruments (scpi) warranty ? one year for U8000 series power supplies ? three months for standard shipped accessories u8001a dc power supply, 30 v, 3 a u8002a dc power supply, 30 v, 5 a included documentation: u8001a-0b0 no documentation package additional documentation: ? u8001a-ab0 traditional chinese users and service guide ? u8001a-ab2 china C simpli? ed chinese printed users and service guide ? u8001a-aba english users and service guide ? u8001a-acf japanese users and service guide calibration document: u8001a-uk6 commercial calibration with test result data power options opt 0e9 90 to 110 vac, 47 to 63 hz opt 0em 104 to 126 vac, 47 to 63 hz opt 0e3 207 to 253 vac, 47 to 63 hz other options ? option u800xa-aut custom power on ? e3600a-100 test lead kit ? option 1cm rack-mount kit rack-mount kits to rack-mount a single instrument: adapter kit (p/n 5063-9240) to rack-mount two instruments side-by- side: lock-link kit (p/n 5061-9694) flange kit (p/n 5063-9212) to rack-mount two instruments in a slid- ing support shelf: support shelf (p/n 5063-9255) slide kit (p/n 1494-0015) general characteristics ordering information calibration cycle one year warm-up time 60 minutes
www.agilent.com/? nd/emailupdates get the latest information on the products and applica- tions you select. www.agilent.com/? nd/agilentdirect quickly choose and use your test equipment solutions with con? dence. www.agilent.com/? nd/open agilent open simpli? es the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. agilent offers open connectivity for a broad range of system- ready instruments, open industry software, pc-standard i/o and global support, which are combined to more easily integrate test system development. agilent email updates agilent direct agilent open remove all doubt our repair and calibration services will get your equipment back to you, performing like new, when prom- ised. you will get full value out of your agilent equipment through- out its lifetime. y our equipment will be serviced by agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. you will always have the utmost con? dence in your measurements. agilent offers a wide range of ad- ditional expert test and measure- ment services for your equipment, including initial start-up assistance onsite education and training, as well as design, system integration, and project management. for more information on repair and calibration services, go to www.agilent.com/? nd/removealldoubt for more information on agilent technologies products, applications or services, please contact your local agilent office. the com- plete list is available at: www.agilent.com/? nd/contactus phone or fax americas canada latin america united states (877) 894-4414 305 269 7500 (800) 829-4444 asia paci? c australia china hong kong india japan korea malaysia singapore taiwan thailand 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 1 800 226 008 europe & middle east austria belgium denmark finland france germany ireland israel italy netherlands spain sweden switzerland united kingdom other european countries: www.agilent.com/? nd/contactus revised: october 6, 2008 01 36027 71571 32 (0) 2 404 93 40 45 70 13 15 15 358 (0) 10 855 2100 0825 010 700* *0.125 /minute 07031 464 6333 1890 924 204 972-3-9288-504/544 39 02 92 60 8484 31 (0) 20 547 2111 34 (91) 631 3300 0200-88 22 55 0800 80 53 53 44 (0) 118 9276201 ? agilent technologies, inc. 2009 printed in usa, june 16, 2009 5989-7182en product speci? cations and descriptions in this document subject to change without notice. www.agilent.com
|
